1 x 16″ Hand Nut Riveter
1 x Wrench
1 x Storage Box
1 × User Manual
1 x Warranty Card
12 x Nosepiece
12 x Mandrel
12 x Mandrel Box
120 x Rivet Nut (M3 M4 M5 M6 M8 M10 M12; SAE 10-24, 1/4-20, 5/16-18, 3/8-16, 1/2-13, 10pcs/model)
1.Before your start, please inspect the hand nut riveter and accessories. Make sure they are all intact.
2.Before your start, please check if there is any foreign matter on the mandrel.
3.To avoid the damage of threads, do not tighten too much with wrench.
4.Maintenance of the machine: For long time storage, the foreign parts of the mandrel need to be cleaned and coated with a little anti-rust oil or lubricating oil.
5.Keep the hand nut riveter and accessories away from Children.
How to work?
1.Open the handles to thread the rivet nut onto the mandrel stem.
2.Put the rivet nut into the hole and close the handles to rivet.
3.Rotate the installation knob counterclockwise to release the hand nut riveter after riveting.
How to change mandrels?
1.Use a matched wrench to remove the nosepiece
2.Push the sliding sleeve back and hold it down. Rotate the mandrel to remove it.
3.Push the sliding sleeve back and hold it down, screw the mandrel.
4.Thread on and tighten the nosepiece, release the sliding sleeve.
5.Ready to rivet